Most 'faucet leaks' on a work order are really supply-side hardware at the end of its life: angle stops that weep at the stem, braided lines with corroded ferrules, compression nuts seeping just enough to swell the cabinet floor over a season. NSPIRE cites the leak and the damage it causes, wherever the water starts. The durable repair is unglamorous — replace the stop and the line while you are under the sink, test under pressure with a dry paper towel, and photograph the dry result. Patching the visible drip and leaving ten-year-old lines in place buys the same call again in February. When your crew opens a cabinet for a drip, what is the rule: fix the drip, or renew everything they touch? — Admin
NSPIRE Forum » Inside the Unit » Plumbing & Water Heaters » Angle stops and supply lines: the hardware behind the slow drip
Nov 17, 2026, 4:29 PM
All Building Services LLC — https://renovatemyapartment.com
NSPIRE Photo-Check — https://nspirephotocheck.com
Sign In or register free to reply to this thread. Reading is always open.