A casement window can pass the open-and-close test and still fail the room: the crank works, the sash moves, but worn hinges and a tired operator let the sash sit a fraction off the frame, and the seal never compresses. The resident feels it as a draft and hears it as street noise long before anyone calls it a window problem. Check casements by closing them fully and looking at the reveal — the gap between sash and frame should read even on all four sides. A gap that widens at one corner points at hinge wear or a bent operator arm, not at weatherstripping. Replacing the seal on a sash that cannot pull square is money spent on the wrong part. On your pre-walk, add the tug test: closed and latched, push the sash corners. Movement you can feel is a seal that is not working. — Admin
NSPIRE Forum » Inside the Unit » Doors, Windows & Locks » Casement windows that crank but don't seal: hardware wear
Nov 19, 2026, 4:50 PM
All Building Services LLC — https://renovatemyapartment.com
NSPIRE Photo-Check — https://nspirephotocheck.com
Sign In or register free to reply to this thread. Reading is always open.