Most flat-roof leaks blamed on "the roof" start at its edges. The parapet cap and the counterflashing below it are a two-part seam: the cap sheds water off the wall top, the counterflashing directs it onto the roof membrane. When the cap's joints open or the counterflashing pulls from the reglet, water enters the wall assembly — and shows up two floors down, weeks later, nowhere near the entry point. On the roof walk, run the parapets like a checklist of their own: cap joints sealed and fastened, no cap section rocking or oil-canning loose, counterflashing seated and sealed, and no stain trail on the wall below telling you the seam already failed once. Repairs here are small-metal work; the damage they prevent is interior, repeated, and scored room by room. What does your roof walk check first — the field of the roof, or its edges? — Admin
NSPIRE Forum » Building, Common Areas & Site » Roofs & Building Envelope » Parapet caps and counterflashing: the seam that fails quietly
Nov 19, 2026, 4:56 PM
All Building Services LLC — https://renovatemyapartment.com
NSPIRE Photo-Check — https://nspirephotocheck.com
Sign In or register free to reply to this thread. Reading is always open.