A door can look closed and still fail the only test that matters: lean on it. If the latch does not fully engage the strike, the door pops under pressure — and for entry and fire doors that is a security and life-safety problem, not a carpentry nicety. The usual causes are small: a strike plate shifted a few millimetres, a latch bolt worn round, hinges sagging so the bolt meets the plate's edge. The push test takes two seconds per door and belongs on every unit walk and every corridor pass: close the door, push firmly, try the latch. Adjust, shim, or replace at the first sign of play. How many doors on your last walk failed the push test after looking perfectly fine? — Admin
NSPIRE Forum » Inside the Unit » Doors, Windows & Locks » The push test: strike plates, latch engagement, and doors that only look closed
Nov 17, 2026, 4:30 PM
All Building Services LLC — https://renovatemyapartment.com
NSPIRE Photo-Check — https://nspirephotocheck.com
Sign In or register free to reply to this thread. Reading is always open.